We found 10 results for your search
Oil and Sediment Dewatering Filter - Holds 20kg / 2.5 Litres - 150 Micron || SKU: 1000442 || MPN: GRR 01 05 20 SEDO || Brand: Green Rhino®
Designed for use when pumping and de-watering trenches, manholes, bunds and excavations, these filters are easy to use on-site, cost-effective and offer exceptional return on investment. Suitable for use with all standard mobile water pumps and easily connected with simple reusable cable ties provided, they are used on a daily basis by many of the UK’s leading utility contractors to remove contaminants such as oil and sediment which could otherwise pollute navigable water or drainage systems.
The GREEN RHINO® Oil and Sediment Filter has been constructed from a multi-layered filter system of nylon mono-filament for capturing sediment particles, and layers of polypropylene non-woven material for oil absorbency. With a PVC nylon outer sleeve tested for tensile strength and durability, this rugged filter is built to handle repeated use in harsh conditions.
It is possible to re-use this filter up to 20 times depending on the geology of the sediment being filtered or until the hydrocarbon detector turns a dark blue which indicates the filter has absorbed 2.5L of Oil. The filter will retain 20kg of sediment before having to be emptied so it can be reused.
Perfectly suited for large de-watering jobs where oil might be present in the water, this is the professional utility contractors Sediment filter of choice.
Features :
Extra Large Sediment Filter - 40kg - 150 Micron || SKU: 1000441 || MPN: GRR 01 05 10 SEDO || Brand: Green Rhino®
Designed for use when pumping and de-watering trenches, manholes, bunds and excavations, these filters are easy to use on-site, cost-effective and offer exceptional return on investment. Suitable for use with all standard mobile water pumps and easily connected with the simple reusable cable ties provided, they are used on a daily basis by many of the UK’s leading utility contractors to remove sediment which could otherwise pollute navigable water or drainage systems.
Constructed from a layered system of nylon mono-filament for capturing sediment particles down to 150µm, and a PVC nylon outer sleeve tested for tensile strength and durability, this rugged filter sock is built to handle repeated use in harsh conditions. It's possible to reuse the filter up to 20 times dependant on the geology of the sediment.
The GREEN RHINO® Heavy Duty Sediment Filter will retain 40kg of sediment before having to be emptied so it can be reused meaning its suited well for larger dewatering jobs. Additionally the filter has 4 lifting straps to enable safe lifting, when full, by two people. With up to 800kg of sediment captured per filter and the ease of use, this is the professional utility contractors Sediment filter of choice.
Features :
Multi Filter Manifold System - 4 Gang (4" Bauer Fitting) || SKU: 1000446 || MPN: GRR 99 01 04 MSYS || Brand: Green Rhino®
The Multi Filter Manifold is an adaptable, easy-to-use system for upscaling your dewatering operations.
Use it to harness 4 Dewatering Filters to process large volumes of water without the delays or costs associated with vacuum tankers and sediment tanks.
Compatible with all dewatering filters you can adapt the system to the volume of water.
With 8 Sediment XL filters, emptied and reused 20 times, you could process 6.4 tonnes of sediment.
Explore - GRR 99 01 04 MSYSHeavy Duty Sediment Dewatering Filter - Holds 20kg - 150 Micron || SKU: 1000440 || MPN: GRR 01 05 02 SEDO || Brand: Green Rhino®
Designed for use when pumping and de-watering trenches, manholes, bunds and excavations, these filters are easy to use on-site, cost-effective and offer exceptional return on investment. Suitable for use with all standard mobile water pumps and easily connected with the simple reusable cable ties provided, they are used on a daily basis by many of the UK’s leading utility contractors to remove sediment which could otherwise pollute navigable water or drainage systems.
Constructed from a layered system of nylon mono-filament for capturing sediment particles down to 150µm, and a PVC nylon outer sleeve tested for tensile strength and durability, this rugged filter sock is built to handle repeated use in harsh conditions. It's possible to reuse the filter up to 20 times dependant on the geology of the sediment.
The GREEN RHINO® Heavy Duty Sediment Filter will retain 20kg of sediment before having to be emptied so it can be reused meaning its suited well for larger de-watering jobs.
With up to 400kg of sediment captured per filter and the ease of use, this is the professional utility contractors Sediment filter of choice.
Features :
Budget Sediment Filter - 20 Kg - 100µm || SKU: 1000439 || MPN: GRR 01 06 01 BFIL || Brand: Green Rhino®
Designed for use when pumping and de-watering trenches, manholes, bunds and excavations, these filters are easy to use on-site, cost-effective and offer exceptional return on investment. Suitable for use with all standard mobile water pumps, they are lightweight and small allowing easy storage when not in use.
The GREEN RHINO® Budget Sediment Filter will retain 20kg of sediment before having to be replaced. Which may equate to a single job or a small number of low usage jobs, meaning this filter is ideal for the smaller de-watering activities. When it becomes harder, or impossible, to pump water through, the filter is ready to be replaced.
This entry level sediment filter is designed to fit all budgets and cleans water to Environment Agency accepted levels of 100µm.
Features :
EnviroHorn Sediment Filter - 100 Micron || SKU: 1000607 || MPN: GRR 10 01 01 EHRN || Brand: Green Rhino®
The EnviroHorn Sediment Drain Filter sits inside a roadside drain (gully) and filters out sediment and debris from site run-off. The sediment is retained and the water is discharged to regulator-approved standards of 100µm.
To use the Envirohorn, the conical filter is placed inside the drain pot and the large square top is cut to size leaving a 6” collar on all sides of the drain aperture. This collar is taped down onto the road using a roll of wide insulation tape. This ensures that all run-off goes through the drain filter. If the Envirohorn fills with silt, simply empty out the collected sediment and refit the filter to the drain. Alternatively, it can be emptied while in situ by simply scooping the sediment out.
The Envirohorn is capable of collecting 21kg of Sediment before it needs emptying to be reused.
Features :
Quick Response Oil & Sediment Dewatering Pack - 15 Pillow || SKU: 1000455 || MPN: GRR 02 00 15 DWAT || Brand: Green Rhino®
Essential for construction sites and maintenance gangs. Water discharged to EA-accepted levels. Dewatering Filter will remove 2.5L oil and 20kg sediment. Where contamination is more serious, use pillows first – each pillow absorbs and retains 1L oil. Pillows contain our smart polymer which turns oil and fuel into solid rubber so it can’t leak out. Empty and reuse filter up to 20 times or until integral oil detector turns dark blue. Standard COSHH disposal.
Explore - GRR 02 00 15 DWATEnviroHorn Oil and Sediment Drain Filter - Holds 19kg / 1 Litre - 100 Micron || SKU: 1000608 || MPN: GRR 10 00 01 EHRN || Brand: Green Rhino®
The EnviroHorn Sediment Drain Filter sits inside a roadside drain (gully) and filters out sediment and debris from site run-off. The sediment and oil is retained and the water is discharged to regulator-approved standards of 100µm.
To use the Envirohorn, the conical filter is placed inside the drain pot and the large square top is cut to size leaving a 6” collar on all sides of the drain aperture. This collar is taped down onto the road using a roll of wide insulation tape. This ensures that all run-off goes through the drain filter. If the Envirohorn fills with silt, simply empty out the collected sediment and refit the filter to the drain. Alternatively, it can be emptied while in situ by simply scooping the sediment out.
The Envirohorn is capable of collecting 19kg of Sediment before it needs emptying to be reused. Additionally this variation of the filter retains up to 1 litre of oil, once the hydrocarbon indicator becomes a dark blue then the filter is full of oil and will need to be replaced rather than reused.
Features :
Quick Response Oil & Sediment Dewatering Pack - 5 Pillow || SKU: 1000452 || MPN: GRR 02 00 05 DWAT || Brand: Green Rhino®
Essential for construction sites and maintenance gangs. Water discharged to EA-accepted levels. Dewatering Filter will remove 2.5L oil and 20kg sediment. Where contamination is more serious, use pillows first – each pillow absorbs and retains 1L oil. Pillows contain our smart polymer which turns oil and fuel into solid rubber so it can’t leak out. Empty and reuse filter up to 20 times or until integral oil detector turns dark blue. Standard COSHH disposal.
Explore - GRR 02 00 05 DWATMulti Filter Manifold System - 6 Gang (4" Bauer Fitting) || SKU: 1000447 || MPN: GRR 99 01 06 MSYS || Brand: Green Rhino®
The Multi Filter Manifold is an adaptable, easy-to-use system for upscaling your dewatering operations.
Use it to harness 4 Dewatering Filters to process large volumes of water without the delays or costs associated with vacuum tankers and sediment tanks.
Compatible with all dewatering filters you can adapt the system to the volume of water.
With 8 Sediment XL filters, emptied and reused 20 times, you could process 6.4 tonnes of sediment.
Explore - GRR 99 01 06 MSYSWe value your privacy
We sometimes use a number cookies to improve your browsing experience, but these are not always essential to the propper functionality of our site. By clicking "Accept All", you consent to our use of these additional cookies. Privacy Statement
